ATM-FORUM-SNMP-M4-MIB DEFINITIONS::=BEGIN
IMPORTSMODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,OBJECT-IDENTITY,Integer32,IpAddress,Gauge32,Unsigned32, enterprises FROM SNMPv2-SMI
TEXTUAL-CONVENTION,DisplayString,AutonomousType,RowStatus,TestAndIncr,RowPointer,TruthValue,TimeStamp,DateAndTime,TimeIntervalFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
ifIndex, ifOperStatus,OwnerStringFROM IF-MIB
atmVplEntry, atmVplVpi,atmVplOperStatus,atmVclEntry, atmVclVpi, atmVclVci,atmVclOperStatus,atmVpCrossConnectEntry,atmVpCrossConnectL2HOperStatus,atmVpCrossConnectH2LOperStatus,atmVcCrossConnectEntry,atmVcCrossConnectL2HOperStatus,atmVcCrossConnectH2LOperStatus FROM ATM-MIB
entPhysicalIndex, entPhysicalClass,entPhysicalContainedIn,entPhysicalParentRelPos
FROM ENTITY-MIB
hrSWInstalledIndex,hrSWInstalledName FROM HOST-RESOURCES-MIB;atmfM4MIB MODULE-IDENTITYLAST-UPDATED"9805140000Z"ORGANIZATION"The ATM Forum"CONTACT-INFO"The ATM Forum
2570 West El Camino Real, Suite 304
Mountain View, CA 94040-1313 USA
Phone: +1 415-949-6700
Fax: +1 415-949-6705
info@atmforum.com"DESCRIPTION"This MIB module is the SNMP version of the ATM Forum's
M4 interface (network element view)."REVISION"9805140000Z"DESCRIPTION"Initial version of MIB module ATM-FORUM-SNMP-M4-MIB."
::={ atmfM4SnmpNEView 1}atmForum OBJECTIDENTIFIER::={ enterprises 353}atmForumNetworkManagement OBJECTIDENTIFIER::={ atmForum 5}atmfM4 OBJECTIDENTIFIER::={ atmForumNetworkManagement 1}atmfM4SnmpNEView OBJECTIDENTIFIER::={ atmfM4 3}atmfM4MIBObjects OBJECTIDENTIFIER::={ atmfM4MIB 1}atmfM4MIBTraps OBJECTIDENTIFIER::={ atmfM4MIB 2}atmfM4MIBTrapPrefix OBJECTIDENTIFIER::={ atmfM4MIBTraps 0}atmfM4MIBConformance OBJECTIDENTIFIER::={ atmfM4MIB 3}-- This MIB module consists of the following groups:
-- (1) ATM NE High-Level Objects
-- (2) Interfaces: Physical Path Termination Point Table
-- (3) TC Adapter Table
-- (4) ATM Cell Layer Interface Table
-- (5) VPL Termination Point Table Extensions
-- (6) VCL Termination Point Table Extensions
-- (7) VP Cross-Connect Table Extensions
-- (8) VC Cross-Connect Table Extensions
-- (9) VP 'next VPI' Table
-- (10) VC 'next VCI' Table
-- (11) ATM Cell Protocol Monitoring Current Data Table
-- (12) ATM Cell Protocol Monitoring History Data Table
-- (13) ATM Cell Protocol Monitoring Error Log Table
-- (14) TC Adapter Protocol Monitoring Current Data Table
-- (15) TC Adapter Protocol Monitoring History Data Table
-- (16) VPL UPC/NPC Disagreement Monitoring Current Data Table
-- (17) VPL UPC/NPC Disagreement Monitoring History Data Table
-- (18) VCL UPC/NPC Disagreement Monitoring Current Data Table
-- (19) VCL UPC/NPC Disagreement Monitoring History Data Table
-- (20) OAM Loopback Test Definitions
-- (21) VPL/VPC Termination Point Test Table
-- (22) VCL/VCC Termination Point Test Table
-- (23) Equipment Table extension
-- (24) Equipment Holder Table extension
-- (25) Plug-In Unit Table extension
-- (26) Hardware Unit/Running Software Relationship Table
-- (27) Hardware Unit/Installed Software Relationship Table
-- (28) Alarm Forwarding Discriminator Table
-- (29) Trap Log Table
-- (30) Trap Log Entry Table
-- (31) Alarm Trap Log Entry Table extension
-- (32) Notifications (traps)
-- (33) Conformance statements-- ATM Forum M4 ATM network element (NE) high-level objectsatmfM4NeVendor OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The vendor of the ATM network element."::={ atmfM4MIBObjects 1}atmfM4NeVersion OBJECT-TYPESYNTAXAutonomousTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The version of the ATM network element."::={ atmfM4MIBObjects 2}atmfM4NeStartTime OBJECT-TYPESYNTAXDateAndTimeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time at which the agent was last started; in other
words, the time at which sysUpTime was zero."::={ atmfM4MIBObjects 3}atmfM4NeAlarmSeverityIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for the
ATM network element. The default value for this object is
zero."::={ atmfM4MIBObjects 4}atmfM4NeSuppressZeroStats OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When the value of this object is true, no entry will be
created in any of the historical statistics tables for
intervals in which all counts are zero. The default value for
this object is true(1)."::={ atmfM4MIBObjects 5}-- ATM Forum M4 Interface Configuration Table Extensions
-- Physical Path Termination Point LayeratmfM4PhysPathTpTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4PhysPathTpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 interface Configuration table extensions
for the physical path termination point."::={ atmfM4MIBObjects 6}atmfM4PhysPathTpEntry OBJECT-TYPESYNTAX AtmfM4PhysPathTpEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Columns conceptually added to the interface table
entry for an ATM interface to model the physical path
termination point.
The row of the interface table modeling this object should
also include columns for the TC Adapter object and the ATM
interface table defined in RFC 1695.
The interface table entry for the physical path TP
fields of an ATM interface are set up without management
system control (or else that setup is outside the
scope of M4)."INDEX{ ifIndex }::={ atmfM4PhysPathTpTable 1}
AtmfM4PhysPathTpEntry ::=SEQUENCE{
atmfM4PhysPathTpHwUnitIndex Integer32,
atmfM4PhysPathTpPortID Integer32,
atmfM4PhysPathTpAlarmSeverityIndex Integer32}atmfM4PhysPathTpHwUnitIndex OBJECT-TYPESYNTAXInteger32(1..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Specifies the index of the entry in the entPhysicalTable
that represents the device (i.e., card) on which the
physical path terminates."::={ atmfM4PhysPathTpEntry 1}atmfM4PhysPathTpPortID OBJECT-TYPESYNTAXInteger32(1..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Identifies the port (within the card identified by the
hardware unit index) on which the physical path terminates."::={ atmfM4PhysPathTpEntry 2}atmfM4PhysPathTpAlarmSeverityIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the index of the entry in the communications
alarm severity profile table that should be used. The default
value of this object is zero."::={ atmfM4PhysPathTpEntry 3}-- ATM Forum M4 Interface Configuration Table Extensions
-- TC Adapter LayeratmfM4TcAdapterTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4TcAdapterEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 interface Configuration table extensions
for the TC Adapter."::={ atmfM4MIBObjects 7}atmfM4TcAdapterEntry OBJECT-TYPE
SYNTAX AtmfM4TcAdapterEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Columns conceptually added to the interface table
entry for an ATM interface to model the TC Adapter.
The row of the interface table modeling this object should
also include columns for the physical path TP and the ATM
interface table defined in RFC 1695.
The interface table entry for the TC Adapter
fields of an ATM interface are set up without management
system control (or else that setup is outside the
scope of M4)."INDEX{ ifIndex }::={ atmfM4TcAdapterTable 1}
AtmfM4TcAdapterEntry ::=SEQUENCE{
atmfM4TcACellScrambling TruthValue,
atmfM4TcAlarmSeverityIndex Integer32}atmfM4TcACellScrambling OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This attribute is used by the management system to
activate and deactivate the ATM cell scrambling function.
When the value of this attribute is TRUE, cell scrambling
on the interface is activated.
This attribute shall be present only for interfaces that
support the deactivation of cell scrambling. The ATM Forum
UNI specification requires cell scrambling for ATM/SONET
interfaces but allows cell scrambling to be controlled
(i.e., turned on and off) for ATM/DS3 interfaces.
The default value of this object is true(1)."::={ atmfM4TcAdapterEntry 1}atmfM4TcAlarmSeverityIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the index of the entry in the communications
alarm severity profile table that should be used. The
default value of this object is zero."::={ atmfM4TcAdapterEntry 2}-- ATM Forum M4 Interface Configuration Table Extensions
-- ATM Cell LayeratmfM4AtmLayerTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4AtmLayerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 interface Configuration table extensions
for the ATM cell layer."::={ atmfM4MIBObjects 8}atmfM4AtmLayerEntry OBJECT-TYPESYNTAX AtmfM4AtmLayerEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"Columns conceptually added to the interface table
entry for an ATM interface to model the ATM cell layer.
The row of the interface table modeling this object should
also include columns for the physical path TP and TC Adapter
object, as well as the ATM interface table defined in
RFC 1695.
The default configuration of an entry in this table is
used whenever the entries for the physical path TP, etc.,
are created. The management system configures a UNI,
B-ICI, or B-ISSI on the interface by first modifying the
atmfM4IfType column (this can be done in the same SNMP
set-request that sets up the other necessary variables."INDEX{ ifIndex }::={ atmfM4AtmLayerTable 1}
AtmfM4AtmLayerEntry ::=SEQUENCE{
atmfM4IfType INTEGER,
atmfM4IfLoopbackLocationCode Integer32,
atmfM4IfSubscriberAddress DisplayString,
atmfM4IfPreferredCarrier DisplayString,
atmfM4IfFarEndCarrierNetwork DisplayString}atmfM4IfType OBJECT-TYPESYNTAXINTEGER{none(0),uni(1),bici(2),bissi(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the type of ATM cell layer interface defined
on the physical path termination point modeled by this
entry in the interface table. The default value of this
object is none(0)."::={ atmfM4AtmLayerEntry 1}atmfM4IfLoopbackLocationCode OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the code that shall exist in incoming OAM
Loopback cells that are to be looped back at this
interface.
A value of zero shall indicate that the management system
has not set any loopback location code for this interface.
Therefore, zero should not be used as the actual loopback
location code for any interface.
This object shall be present only for table entries that
represent an actual ATM cell layer interface (i.e., the
atmfM4IfType is not none(0)).
The default value of this object is zero."::={ atmfM4AtmLayerEntry 2}
atmfM4IfSubscriberAddress OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the address or newline-delimited list of
addresses assigned to the UNI.
This object shall be present only for table entries that
represent a UNI interface.
The default value of this object is the null string."::={ atmfM4AtmLayerEntry 3}atmfM4IfPreferredCarrier OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the name of the default carrier to use when one
is not explicitly identified in the call set-up message.
This object shall be present only for table entries that
represent a UNI interface and only when SVC services are
supported.
The default value of this object is the null string."::={ atmfM4AtmLayerEntry 4}atmfM4IfFarEndCarrierNetwork OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the adjacent carrier to which the B-ICI
transmission path is connected.
This object shall be present only for table entries that
represent a B-ICI interface and only when SVC services are
supported.
The default value of this object is the null string."::={ atmfM4AtmLayerEntry 5}-- ATM Forum M4 VPL Termination Point Configuration Table ExtensionsatmfM4VplTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VplEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 VPL Termination Point Configuration
table extensions. This table augments the VPL
configuration table in RFC 1695."::={ atmfM4MIBObjects 9}atmfM4VplEntry OBJECT-TYPESYNTAX AtmfM4VplEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Additional columns for the VPL configuration table entry."AUGMENTS{ atmVplEntry }::={ atmfM4VplTable 1}
AtmfM4VplEntry ::=SEQUENCE{
atmfM4VplSegEndPt TruthValue}atmfM4VplSegEndPt OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Specifies whether the VPL termination point is a segment
end-point."DEFVAL{ false }::={ atmfM4VplEntry 1}-- ATM Forum M4 VCL Termination Point Configuration Table ExtensionsatmfM4VclTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VclEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 VCL Termination Point Configuration
table extensions. This table augments the VCL
configuration table in RFC 1695."::={ atmfM4MIBObjects 10}atmfM4VclEntry OBJECT-TYPESYNTAX AtmfM4VclEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Additional columns for the VCL configuration table entry."AUGMENTS{ atmVclEntry }::={ atmfM4VclTable 1}
AtmfM4VclEntry ::=SEQUENCE{
atmfM4VclSegEndPt TruthValue}atmfM4VclSegEndPt OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Specifies whether the VCL termination point is a segment
end-point."DEFVAL{ false }::={ atmfM4VclEntry 1}-- ATM Forum M4 VP Cross-Connect Table ExtensionsatmfM4VpXConnTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VpXConnEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 VP Cross-Connect Configuration
table extensions. This table augments the VP Cross-Connect
configuration table in RFC 1695."::={ atmfM4MIBObjects 11}atmfM4VpXConnEntry OBJECT-TYPESYNTAX AtmfM4VpXConnEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Additional columns for the VP Cross-Connect table entry."
AUGMENTS{ atmVpCrossConnectEntry }::={ atmfM4VpXConnTable 1}
AtmfM4VpXConnEntry ::=SEQUENCE{
atmfM4VpXConnRecover TruthValue}atmfM4VpXConnRecover OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-createSTATUScurrentDESCRIPTION"If FALSE, this cross-connection will be removed on
failure."DEFVAL{ true }::={ atmfM4VpXConnEntry 1}-- ATM Forum M4 VC Cross-Connect Table ExtensionsatmfM4VcXConnTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VcXConnEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 VC Cross-Connect Configuration
table extensions. This table augments the VC Cross-Connect
configuration table in RFC 1695."::={ atmfM4MIBObjects 12}atmfM4VcXConnEntry OBJECT-TYPESYNTAX AtmfM4VcXConnEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Additional columns for the VC Cross-Connect table entry."AUGMENTS{ atmVcCrossConnectEntry }::={ atmfM4VcXConnTable 1}
AtmfM4VcXConnEntry ::=SEQUENCE{
atmfM4VcXConnRecover TruthValue}atmfM4VcXConnRecover OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-createSTATUScurrentDESCRIPTION"If FALSE, this cross-connection will be removed on
failure."DEFVAL{ true }::={ atmfM4VcXConnEntry 1}-- ATM Forum M4 VP "Next VPI" TableatmfM4VpNextVpiTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VpNextVpiEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 VP Next VPI value table. This optional
table supplies unused VPI values for use in creating
entries in the atmVplTable."::={ atmfM4MIBObjects 13}atmfM4VpNextVpiEntry OBJECT-TYPESYNTAX AtmfM4VpNextVpiEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table represents the 'next' VPI
value available for a given ATM interface.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it."INDEX{ ifIndex }::={ atmfM4VpNextVpiTable 1}
AtmfM4VpNextVpiEntry ::=SEQUENCE{
atmfM4VpNextVpiValue INTEGER}atmfM4VpNextVpiValue OBJECT-TYPESYNTAXINTEGER(-1..4095)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains an appropriate value to be used for
atmVplVpi when creating entries in the atmVplTable. The
value -1 indicates that no unassigned entries are available.
To obtain the atmVplVpi value for a new entry, the manager
issues a management protocol retrieval operation to obtain
the current value of this object. After each retrieval, the
agent should modify the value to the next unassigned index
(or -1)."::={ atmfM4VpNextVpiEntry 1}-- ATM Forum M4 VC "Next VCI" TableatmfM4VcNextVciTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VcNextVciEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 VC Next VCI value table. This optional
table supplies unused VCI values for use in creating
entries in the atmVclTable."::={ atmfM4MIBObjects 14}atmfM4VcNextVciEntry OBJECT-TYPESYNTAX AtmfM4VcNextVciEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table represents the 'next' VCI
value available for a given ATM interface.
Each VPL Termination Point automatically has
an entry in this table associated with it."INDEX{ ifIndex,
atmVplVpi }::={ atmfM4VcNextVciTable 1}
AtmfM4VcNextVciEntry ::=SEQUENCE{
atmfM4VcNextVciValue INTEGER
}atmfM4VcNextVciValue OBJECT-TYPESYNTAXINTEGER(-1..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains an appropriate value to be used for
atmVclVci when creating entries in the atmVclTable. The
value -1 indicates that no unassigned entries are available.
To obtain the atmVclVci value for a new entry, the manager
issues a management protocol retrieval operation to obtain
the current value of this object. After each retrieval, the
agent should modify the value to the next unassigned index
(or -1)."::={ atmfM4VcNextVciEntry 1}-- ATM Cell Protocol Monitoring Current Data (per interface)atmfM4CellProtoCurrTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4CellProtoCurrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Cell Protocol Monitoring Current Data
table.
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected."::={ atmfM4MIBObjects 15}atmfM4CellProtoCurrEntry OBJECT-TYPESYNTAX AtmfM4CellProtoCurrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 Cell Protocol Monitoring
Current Data table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it."INDEX{ ifIndex }::={ atmfM4CellProtoCurrTable 1}
AtmfM4CellProtoCurrEntry ::=SEQUENCE{
atmfM4CellProtoCurrSuspect TruthValue,
atmfM4CellProtoCurrElapsedTime TimeInterval,
atmfM4CellProtoCurrSupprIntvls Gauge32,
atmfM4CellProtoCurrProtoErrors Gauge32,
atmfM4CellProtoCurrInOAMCells Gauge32}atmfM4CellProtoCurrSuspect OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, the statistics in this entry may be unreliable."::={ atmfM4CellProtoCurrEntry 1}atmfM4CellProtoCurrElapsedTime OBJECT-TYPE
SYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."::={ atmfM4CellProtoCurrEntry 2}atmfM4CellProtoCurrSupprIntvls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to the current interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."::={ atmfM4CellProtoCurrEntry 3}atmfM4CellProtoCurrProtoErrors OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of ATM cells dropped on this interface, due to
an unrecognized field or set of fields in the ATM cell
header, since the start of this interval."::={ atmfM4CellProtoCurrEntry 4}atmfM4CellProtoCurrInOAMCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of OAM cells received at this interface since
the start of this interval."::={ atmfM4CellProtoCurrEntry 5}-- ATM Cell Protocol Monitoring History Data (per interface and time
-- interval)atmfM4CellProtoHistTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4CellProtoHistEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Cell Protocol Monitoring History Data
table.
This table maintains per-interface statistics for previous
fifteen-minute intervals."::={ atmfM4MIBObjects 16}atmfM4CellProtoHistEntry OBJECT-TYPESYNTAX AtmfM4CellProtoHistEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"An entry in the ATM Forum M4 Cell Protocol Monitoring
History Data table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each fifteen-
minute interval in which statistics are collected for it."INDEX{ ifIndex,
atmfM4CellProtoHistIndex }::={ atmfM4CellProtoHistTable 1}
AtmfM4CellProtoHistEntry ::=SEQUENCE{
atmfM4CellProtoHistIndex INTEGER,
atmfM4CellProtoHistSuspect TruthValue,
atmfM4CellProtoHistElapsedTime TimeInterval,
atmfM4CellProtoHistSupprIntvls Gauge32,
atmfM4CellProtoHistProtoErrors Gauge32,
atmfM4CellProtoHistInOAMCells Gauge32}atmfM4CellProtoHistIndex OBJECT-TYPESYNTAXINTEGER(1..96)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.
The interval identified by 1 is the most recently completed
15 minute interval, and the interval identified by N is the
interval immediately preceding the one identified by N-1."::={ atmfM4CellProtoHistEntry 1}atmfM4CellProtoHistSuspect OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, the statistics in this entry may be unreliable."::={ atmfM4CellProtoHistEntry 2}atmfM4CellProtoHistElapsedTime OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."::={ atmfM4CellProtoHistEntry 3}atmfM4CellProtoHistSupprIntvls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to this 'non-all-zeroes' history interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."::={ atmfM4CellProtoHistEntry 4}atmfM4CellProtoHistProtoErrors OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of ATM cells dropped on this interface, due to
an unrecognized field or set of fields in the ATM cell
header, during this interval."::={ atmfM4CellProtoHistEntry 5}atmfM4CellProtoHistInOAMCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of OAM cells received at this interface during
this interval."::={ atmfM4CellProtoHistEntry 6}-- ATM Cell Protocol Monitoring Error Log (per interface, error code)atmfM4CellProtoErrorTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4CellProtoErrorEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Cell Protocol Monitoring Error Log
table.
This table maintains a record of the last error of each
type encountered on each interface, as a result of ATM
Cell Protocol Monitoring."::={ atmfM4MIBObjects 17}atmfM4CellProtoErrorEntry OBJECT-TYPESYNTAX AtmfM4CellProtoErrorEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 Cell Protocol Monitoring
Error Log table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each error
that has occurred since agent start-up."INDEX{ ifIndex,
atmfM4CellProtoErrorCode }::={ atmfM4CellProtoErrorTable 1}
AtmfM4CellProtoErrorEntry ::=SEQUENCE{
atmfM4CellProtoErrorCode Integer32,
atmfM4CellProtoErrorTime TimeStamp,
atmfM4CellProtoErrorReason INTEGER,
atmfM4CellProtoErrorVpi INTEGER,
atmfM4CellProtoErrorVci INTEGER}atmfM4CellProtoErrorCode OBJECT-TYPESYNTAXInteger32(0..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Indicates the type of error for which this entry contains
information. The range and interpretation of this error
code value is left up to the individual agent implementor."::={ atmfM4CellProtoErrorEntry 1}atmfM4CellProtoErrorTime OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Value of sysUpTime when the error occurred."::={ atmfM4CellProtoErrorEntry 2}atmfM4CellProtoErrorReason OBJECT-TYPESYNTAXINTEGER{unassignedVpiVciValue(1),outOfRangeVpiVciValue(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The cell header abnormality type: the reason for discarding
the ATM cell (i.e., unassigned VPI/VCI value or VPI/VCI
value out of range)."::={ atmfM4CellProtoErrorEntry 3}atmfM4CellProtoErrorVpi OBJECT-TYPESYNTAXINTEGER(0..4095)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The VPI value of the discarded cell."::={ atmfM4CellProtoErrorEntry 4}atmfM4CellProtoErrorVci OBJECT-TYPESYNTAXINTEGER(0..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The VCI value of the discarded cell."::={ atmfM4CellProtoErrorEntry 5}-- TC Adapter Protocol Monitoring Current Data (per interface)atmfM4TcProtoCurrTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4TcProtoCurrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 TC Adapter Protocol Monitoring Current
Data table.
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected."::={ atmfM4MIBObjects 18}atmfM4TcProtoCurrEntry OBJECT-TYPESYNTAX AtmfM4TcProtoCurrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 TC Adapter Protocol Monitoring
Current Data table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it."INDEX{ ifIndex }::={ atmfM4TcProtoCurrTable 1}
AtmfM4TcProtoCurrEntry ::=SEQUENCE{
atmfM4TcProtoCurrSuspect TruthValue,
atmfM4TcProtoCurrElapsedTime TimeInterval,
atmfM4TcProtoCurrSupprIntvls Gauge32,
atmfM4TcProtoCurrDiscardHECViol Gauge32}atmfM4TcProtoCurrSuspect OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, the statistics in this entry may be unreliable."::={ atmfM4TcProtoCurrEntry 1}atmfM4TcProtoCurrElapsedTime OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."::={ atmfM4TcProtoCurrEntry 2}atmfM4TcProtoCurrSupprIntvls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute is non-zero only if the ATM NE is
suppressing ATM TC Adapter Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to the current interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::={ atmfM4TcProtoCurrEntry 3}atmfM4TcProtoCurrDiscardHECViol OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of ATM cells discarded on this interface, due to
a HEC violation, since the start of this interval."::={ atmfM4TcProtoCurrEntry 4}-- ATM TC Adapter Protocol Monitoring History Data (per interface and
-- time interval)atmfM4TcProtoHistTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4TcProtoHistEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 TC Adapter Protocol Monitoring History
Data table.
This table maintains per-interface statistics for previous
fifteen-minute intervals."::={ atmfM4MIBObjects 19}atmfM4TcProtoHistEntry OBJECT-TYPESYNTAX AtmfM4TcProtoHistEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 TC Adapter Protocol Monitoring
History Data table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each fifteen-
minute interval in which statistics are collected for it."INDEX{ ifIndex,
atmfM4TcProtoHistIndex }::={ atmfM4TcProtoHistTable 1}
AtmfM4TcProtoHistEntry ::=SEQUENCE{
atmfM4TcProtoHistIndex INTEGER,
atmfM4TcProtoHistSuspect TruthValue,
atmfM4TcProtoHistElapsedTime TimeInterval,
atmfM4TcProtoHistSupprIntvls Gauge32,
atmfM4TcProtoHistDiscardHECViol Gauge32}atmfM4TcProtoHistIndex OBJECT-TYPESYNTAXINTEGER(1..96)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.
The interval identified by 1 is the most recently completed
15 minute interval, and the interval identified by N is the
interval immediately preceding the one identified by N-1."::={ atmfM4TcProtoHistEntry 1}
atmfM4TcProtoHistSuspect OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, the statistics in this entry may be unreliable."::={ atmfM4TcProtoHistEntry 2}atmfM4TcProtoHistElapsedTime OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."::={ atmfM4TcProtoHistEntry 3}atmfM4TcProtoHistSupprIntvls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to this 'non-all-zeroes' history interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."::={ atmfM4TcProtoHistEntry 4}atmfM4TcProtoHistDiscardHECViol OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of ATM cells discarded on this interface, due to
a HEC violation, during this interval."::={ atmfM4TcProtoHistEntry 5}-- UPC/NPC Disagreement Monitoring Current Data (per VPL
-- termination point)atmfM4VpUpcNpcCurrTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VpUpcNpcCurrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VPL termination points.
This table maintains per-TP statistics for the
fifteen-minute interval currently being collected."::={ atmfM4MIBObjects 20}atmfM4VpUpcNpcCurrEntry OBJECT-TYPESYNTAX AtmfM4VpUpcNpcCurrEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring Current Data table for VPL termination points.
Each VPL Termination Point automatically has
an entry in this table associated with it."INDEX{ ifIndex,
atmVplVpi }::={ atmfM4VpUpcNpcCurrTable 1}
AtmfM4VpUpcNpcCurrEntry ::=SEQUENCE{
atmfM4VpUpcNpcCurrSuspect TruthValue,
atmfM4VpUpcNpcCurrElapsedTime TimeInterval,
atmfM4VpUpcNpcCurrSupprIntvls Gauge32,
atmfM4VpUpcNpcCurrDiscardedCells Gauge32,
atmfM4VpUpcNpcCurrDiscardedClp0 Gauge32,
atmfM4VpUpcNpcCurrPassedCells Gauge32,
atmfM4VpUpcNpcCurrPassedClp0 Gauge32}atmfM4VpUpcNpcCurrSuspect OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, the statistics in this entry may be unreliable."::={ atmfM4VpUpcNpcCurrEntry 1}atmfM4VpUpcNpcCurrElapsedTime OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."::={ atmfM4VpUpcNpcCurrEntry 2}atmfM4VpUpcNpcCurrSupprIntvls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to the current interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."::={ atmfM4VpUpcNpcCurrEntry 3}atmfM4VpUpcNpcCurrDiscardedCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing."::={ atmfM4VpUpcNpcCurrEntry 4}atmfM4VpUpcNpcCurrDiscardedClp0 OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."::={ atmfM4VpUpcNpcCurrEntry 5}atmfM4VpUpcNpcCurrPassedCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing."::={ atmfM4VpUpcNpcCurrEntry 6}atmfM4VpUpcNpcCurrPassedClp0 OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."::={ atmfM4VpUpcNpcCurrEntry 7}-- UPC/NPC Disagreement Monitoring History (per VPL termination
-- point and time interval)atmfM4VpUpcNpcHistTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VpUpcNpcHistEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VPL termination points.
This table maintains per-interface statistics for previous
fifteen-minute intervals."::={ atmfM4MIBObjects 21}atmfM4VpUpcNpcHistEntry OBJECT-TYPESYNTAX AtmfM4VpUpcNpcHistEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring History Data table for VPL termination points.
Each VPL Termination Point automatically has
an entry in this table associated with it."INDEX{ ifIndex,
atmVplVpi,
atmfM4VpUpcNpcHistIndex }::={ atmfM4VpUpcNpcHistTable 1}
AtmfM4VpUpcNpcHistEntry ::=SEQUENCE{
atmfM4VpUpcNpcHistIndex INTEGER,
atmfM4VpUpcNpcHistSuspect TruthValue,
atmfM4VpUpcNpcHistElapsedTime TimeInterval,
atmfM4VpUpcNpcHistSupprIntvls Gauge32,
atmfM4VpUpcNpcHistDiscardedCells Gauge32,
atmfM4VpUpcNpcHistDiscardedClp0 Gauge32,
atmfM4VpUpcNpcHistPassedCells Gauge32,
atmfM4VpUpcNpcHistPassedClp0 Gauge32}atmfM4VpUpcNpcHistIndex OBJECT-TYPESYNTAXINTEGER(1..96)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.
The interval identified by 1 is the most recently completed
15 minute interval, and the interval identified by N is the
interval immediately preceding the one identified by N-1."::={ atmfM4VpUpcNpcHistEntry 1}atmfM4VpUpcNpcHistSuspect OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, the statistics in this entry may be unreliable."::={ atmfM4VpUpcNpcHistEntry 2}atmfM4VpUpcNpcHistElapsedTime OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."::={ atmfM4VpUpcNpcHistEntry 3}atmfM4VpUpcNpcHistSupprIntvls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to this 'non-all-zeroes' history interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::={ atmfM4VpUpcNpcHistEntry 4}atmfM4VpUpcNpcHistDiscardedCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing."::={ atmfM4VpUpcNpcHistEntry 5}atmfM4VpUpcNpcHistDiscardedClp0 OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."::={ atmfM4VpUpcNpcHistEntry 6}atmfM4VpUpcNpcHistPassedCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing."::={ atmfM4VpUpcNpcHistEntry 7}atmfM4VpUpcNpcHistPassedClp0 OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."::={ atmfM4VpUpcNpcHistEntry 8}-- UPC/NPC Disagreement Monitoring Current Data (per VCL
-- termination point)atmfM4VcUpcNpcCurrTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VcUpcNpcCurrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VCL termination points.
This table maintains per-TP statistics for the
fifteen-minute interval currently being collected."::={ atmfM4MIBObjects 22}atmfM4VcUpcNpcCurrEntry OBJECT-TYPESYNTAX AtmfM4VcUpcNpcCurrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring Current Data table for VCL termination points.
Each VCL Termination Point automatically has
an entry in this table associated with it."INDEX{ ifIndex,
atmVclVpi,
atmVclVci }::={ atmfM4VcUpcNpcCurrTable 1}
AtmfM4VcUpcNpcCurrEntry ::=SEQUENCE{
atmfM4VcUpcNpcCurrSuspect TruthValue,
atmfM4VcUpcNpcCurrElapsedTime TimeInterval,
atmfM4VcUpcNpcCurrSupprIntvls Gauge32,
atmfM4VcUpcNpcCurrDiscardedCells Gauge32,
atmfM4VcUpcNpcCurrDiscardedClp0 Gauge32,
atmfM4VcUpcNpcCurrPassedCells Gauge32,
atmfM4VcUpcNpcCurrPassedClp0 Gauge32}atmfM4VcUpcNpcCurrSuspect OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, the statistics in this entry may be unreliable."::={ atmfM4VcUpcNpcCurrEntry 1}atmfM4VcUpcNpcCurrElapsedTime OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."::={ atmfM4VcUpcNpcCurrEntry 2}atmfM4VcUpcNpcCurrSupprIntvls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to the current interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."::={ atmfM4VcUpcNpcCurrEntry 3}atmfM4VcUpcNpcCurrDiscardedCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing."
::={ atmfM4VcUpcNpcCurrEntry 4}atmfM4VcUpcNpcCurrDiscardedClp0 OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."::={ atmfM4VcUpcNpcCurrEntry 5}atmfM4VcUpcNpcCurrPassedCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing."::={ atmfM4VcUpcNpcCurrEntry 6}atmfM4VcUpcNpcCurrPassedClp0 OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."::={ atmfM4VcUpcNpcCurrEntry 7}-- UPC/NPC Disagreement Monitoring History (per VCL termination
-- point and time interval)atmfM4VcUpcNpcHistTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VcUpcNpcHistEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VCL termination points.
This table maintains per-interface statistics for previous
fifteen-minute intervals."::={ atmfM4MIBObjects 23}atmfM4VcUpcNpcHistEntry OBJECT-TYPESYNTAX AtmfM4VcUpcNpcHistEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring History Data table for VCL termination points.
Each VCL Termination Point automatically has
an entry in this table associated with it."INDEX{ ifIndex,
atmVclVpi,
atmVclVci,
atmfM4VcUpcNpcHistIndex }::={ atmfM4VcUpcNpcHistTable 1}
AtmfM4VcUpcNpcHistEntry ::=SEQUENCE{
atmfM4VcUpcNpcHistIndex INTEGER,
atmfM4VcUpcNpcHistSuspect TruthValue,
atmfM4VcUpcNpcHistElapsedTime TimeInterval,
atmfM4VcUpcNpcHistSupprIntvls Gauge32,
atmfM4VcUpcNpcHistDiscardedCells Gauge32,
atmfM4VcUpcNpcHistDiscardedClp0 Gauge32,
atmfM4VcUpcNpcHistPassedCells Gauge32,
atmfM4VcUpcNpcHistPassedClp0 Gauge32}atmfM4VcUpcNpcHistIndex OBJECT-TYPESYNTAXINTEGER(1..96)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.
The interval identified by 1 is the most recently completed
15 minute interval, and the interval identified by N is the
interval immediately preceding the one identified by N-1."::={ atmfM4VcUpcNpcHistEntry 1}atmfM4VcUpcNpcHistSuspect OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, the statistics in this entry may be unreliable."::={ atmfM4VcUpcNpcHistEntry 2}atmfM4VcUpcNpcHistElapsedTime OBJECT-TYPESYNTAXTimeIntervalMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."::={ atmfM4VcUpcNpcHistEntry 3}atmfM4VcUpcNpcHistSupprIntvls OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to this 'non-all-zeroes' history interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."::={ atmfM4VcUpcNpcHistEntry 4}
atmfM4VcUpcNpcHistDiscardedCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing."::={ atmfM4VcUpcNpcHistEntry 5}atmfM4VcUpcNpcHistDiscardedClp0 OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."::={ atmfM4VcUpcNpcHistEntry 6}atmfM4VcUpcNpcHistPassedCells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing."::={ atmfM4VcUpcNpcHistEntry 7}atmfM4VcUpcNpcHistPassedClp0 OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."::={ atmfM4VcUpcNpcHistEntry 8}-- ATM Forum M4 Test TypesatmfM4TestTypes OBJECTIDENTIFIER::={ atmfM4MIBObjects 24}-- OAM Loopback Tests (VPL, VPC, VCL, and VCC termination points):atmfM4TestOAMLoopbackSeg OBJECT-IDENTITYSTATUScurrentDESCRIPTION"This identifies an OAM Loopback Test on a VPL, VPC,
VCL, or VCC termination point, using a segment OAM
cell.
The test type must have appended to it a code that uniquely
identifies an intermediate point responsible for looping
back the cell. If this is absent, the loopback is performed
at the end of the segment or connection.
E.g., the OID { atmfM4TestOAMLoopbackSeg 5 } identifies
that the loopback should be performed at the intermediate
point labeled 5."::={ atmfM4TestTypes 1}atmfM4TestOAMLoopbackE2E OBJECT-IDENTITY
STATUScurrentDESCRIPTION"This identifies an OAM Loopback Test on a VPL, VPC,
VCL, or VCC termination point, using an end-to-end OAM
cell."::={ atmfM4TestTypes 2}-- ATM Forum M4 VP Termination Point Test TableatmfM4VpTestTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VpTestEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 VP Termination Point Test table.
This table allows tests to be run on VPL and VPC
termination points.
The operation of this table is entirely analogous to
that of the ifTestTable in RFC 1573 (which was later
deprecated in RFC 2233), except that the indexes into
this table are different."::={ atmfM4MIBObjects 25}atmfM4VpTestEntry OBJECT-TYPESYNTAX AtmfM4VpTestEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing objects for invoking tests on a
VPL or VPC termination point."INDEX{ ifIndex,
atmVplVpi,
atmfM4VpTestObject }::={ atmfM4VpTestTable 1}
AtmfM4VpTestEntry ::=SEQUENCE{
atmfM4VpTestObject INTEGER,
atmfM4VpTestId TestAndIncr,
atmfM4VpTestStatus INTEGER,
atmfM4VpTestType AutonomousType,
atmfM4VpTestResult INTEGER,
atmfM4VpTestCode OBJECTIDENTIFIER,
atmfM4VpTestOwner OwnerString}atmfM4VpTestObject OBJECT-TYPESYNTAXINTEGER{vplTp(1),vpcTp(2)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Specifies whether the test applies to the VPL termination
point with the specified VPI, or the VPC termination point."::={ atmfM4VpTestEntry 1}atmfM4VpTestId OBJECT-TYPESYNTAXTestAndIncrMAX-ACCESSread-write
STATUScurrentDESCRIPTION"This object identifies the current invocation of the
interface's test."::={ atmfM4VpTestEntry 2}atmfM4VpTestStatus OBJECT-TYPESYNTAXINTEGER{ notInUse(1), inUse(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object indicates whether or not some manager
currently has the necessary 'ownership' required to
invoke a test on this interface. A write to this
object is only successful when it changes its value
from 'notInUse(1)' to 'inUse(2)'. After completion of
a test, the agent resets the value back to
'notInUse(1)'."::={ atmfM4VpTestEntry 3}atmfM4VpTestType OBJECT-TYPESYNTAXAutonomousTypeMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A control variable used to start and stop operator-
initiated interface tests. Most OBJECT IDENTIFIER
values assigned to tests are defined elsewhere, in
association with specific types of interface.
However, this document assigns a value for a full-
duplex loopback test, and defines the special meanings
of the subject identifier:
noTest OBJECT IDENTIFIER ::= { 0 0 }
When the value noTest is written to this object, no
action is taken unless a test is in progress, in which
case the test is aborted. Writing any other value to
this object is only valid when no test is currently in
progress, in which case the indicated test is
initiated.
When read, this object always returns the most recent
value that atmfM4VpTestType was set to. If it has not been
set since the last initialization of the network
management subsystem on the agent, a value of noTest
is returned."::={ atmfM4VpTestEntry 4}atmfM4VpTestResult OBJECT-TYPESYNTAXINTEGER{none(1),-- no test yet requestedsuccess(2),inProgress(3),notSupported(4),unAbleToRun(5),-- due to state of systemaborted(6),
failed(7)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains the result of the most recently
requested test, or the value none(1) if no tests have
been requested since the last reset. Note that this
facility provides no provision for saving the results
of one test when starting another, as could be
required if used by multiple managers concurrently."::={ atmfM4VpTestEntry 5}atmfM4VpTestCode OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains a code which contains more
specific information on the test result, for example
an error-code after a failed test. Error codes and
other values this object may take are specific to the
type of interface and/or test. The value may have the
semantics of either the AutonomousType or
RowPointer textual conventions as defined in RFC
1903 [15]. The identifier:
testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 }
is defined for use if no additional result code is
available."::={ atmfM4VpTestEntry 6}atmfM4VpTestOwner OBJECT-TYPESYNTAXOwnerStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The entity which currently has the 'ownership'
required to invoke a test on this interface."::={ atmfM4VpTestEntry 7}-- ATM Forum M4 VC Termination Point Test TableatmfM4VcTestTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4VcTestEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 VC Termination Point Test table.
This table allows tests to be run on VCL and VCC
termination points.
The operation of this table is entirely analogous to
that of the ifTestTable in RFC 1573 (which was later
deprecated in RFC 2233), except that the indexes into
this table are different."::={ atmfM4MIBObjects 26}atmfM4VcTestEntry OBJECT-TYPESYNTAX AtmfM4VcTestEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing objects for invoking tests on a
VCL or VCC termination point."INDEX{ ifIndex,
atmVclVpi,
atmVclVci,
atmfM4VcTestObject }::={ atmfM4VcTestTable 1}
AtmfM4VcTestEntry ::=SEQUENCE{
atmfM4VcTestObject INTEGER,
atmfM4VcTestId TestAndIncr,
atmfM4VcTestStatus INTEGER,
atmfM4VcTestType AutonomousType,
atmfM4VcTestResult INTEGER,
atmfM4VcTestCode OBJECTIDENTIFIER,
atmfM4VcTestOwner OwnerString}atmfM4VcTestObject OBJECT-TYPESYNTAXINTEGER{vclTp(1),vccTp(2)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Specifies whether the test applies to the VCL termination
point with the specified VPI and VCI values, or to the VCC
termination point."::={ atmfM4VcTestEntry 1}atmfM4VcTestId OBJECT-TYPESYNTAXTestAndIncrMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object identifies the current invocation of the
interface's test."::={ atmfM4VcTestEntry 2}atmfM4VcTestStatus OBJECT-TYPESYNTAXINTEGER{ notInUse(1), inUse(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object indicates whether or not some manager
currently has the necessary 'ownership' required to
invoke a test on this interface. A write to this
object is only successful when it changes its value
from 'notInUse(1)' to 'inUse(2)'. After completion of
a test, the agent resets the value back to
'notInUse(1)'."::={ atmfM4VcTestEntry 3}atmfM4VcTestType OBJECT-TYPESYNTAXAutonomousTypeMAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"A control variable used to start and stop operator-
initiated interface tests. Most OBJECT IDENTIFIER
values assigned to tests are defined elsewhere, in
association with specific types of interface.
However, this document assigns a value for a full-
duplex loopback test, and defines the special meanings
of the subject identifier:
noTest OBJECT IDENTIFIER ::= { 0 0 }
When the value noTest is written to this object, no
action is taken unless a test is in progress, in which
case the test is aborted. Writing any other value to
this object is only valid when no test is currently in
progress, in which case the indicated test is
initiated.
When read, this object always returns the most recent
value that atmfM4VcTestType was set to. If it has not been
set since the last initialization of the network
management subsystem on the agent, a value of noTest
is returned."::={ atmfM4VcTestEntry 4}atmfM4VcTestResult OBJECT-TYPESYNTAXINTEGER{none(1),-- no test yet requestedsuccess(2),inProgress(3),notSupported(4),unAbleToRun(5),-- due to state of systemaborted(6),failed(7)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains the result of the most recently
requested test, or the value none(1) if no tests have
been requested since the last reset. Note that this
facility provides no provision for saving the results
of one test when starting another, as could be
required if used by multiple managers concurrently."::={ atmfM4VcTestEntry 5}atmfM4VcTestCode OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains a code which contains more
specific information on the test result, for example
an error-code after a failed test. Error codes and
other values this object may take are specific to the
type of interface and/or test. The value may have the
semantics of either the AutonomousType or
RowPointer textual conventions as defined in RFC
1903 [15]. The identifier:
testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 }
is defined for use if no additional result code is
available."::={ atmfM4VcTestEntry 6}atmfM4VcTestOwner OBJECT-TYPESYNTAXOwnerStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The entity which currently has the 'ownership'
required to invoke a test on this termination point."::={ atmfM4VcTestEntry 7}-- ATM Forum M4 Equipment TableatmfM4EquipTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4EquipEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Equipment table. This table augments the
entPhysicalTable."::={ atmfM4MIBObjects 28}atmfM4EquipEntry OBJECT-TYPESYNTAX AtmfM4EquipEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 Equipment table. Each entry
of this table represents a piece of equipment within the ATM
NE that neither is nor accepts a replaceable plug-in unit."INDEX{ entPhysicalIndex }::={ atmfM4EquipTable 1}
AtmfM4EquipEntry ::=SEQUENCE{
atmfM4EquipAdminStatus INTEGER,
atmfM4EquipLocation DisplayString,
atmfM4EquipOperStatus INTEGER,
atmfM4EquipVendor DisplayString,
atmfM4EquipVersion AutonomousType,
atmfM4EquipUserLabel DisplayString,
atmfM4EquipAlarmSeverityIndex Integer32}atmfM4EquipAdminStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Used by the administrator to lock and unlock the object."::={ atmfM4EquipEntry 1}atmfM4EquipLocation OBJECT-TYPESYNTAXDisplayString
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The specific or general location of the component."::={ atmfM4EquipEntry 2}atmfM4EquipOperStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2),unknown(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attributes identifies whether or not the component is
capable of performing its normal functions."::={ atmfM4EquipEntry 3}atmfM4EquipVendor OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor of the component."::={ atmfM4EquipEntry 4}atmfM4EquipVersion OBJECT-TYPESYNTAXAutonomousTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The version of the component."::={ atmfM4EquipEntry 5}atmfM4EquipUserLabel OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A user-friendly name for the piece of equipment. The
default value of this object is the null string."::={ atmfM4EquipEntry 6}atmfM4EquipAlarmSeverityIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
component. The default value of this object is zero."::={ atmfM4EquipEntry 7}-- ATM Forum M4 Equipment Holder TableatmfM4EquipHolderTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4EquipHolderEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Equipment Holder table. This table
augments the entPhysicalTable."::={ atmfM4MIBObjects 29}atmfM4EquipHolderEntry OBJECT-TYPESYNTAX AtmfM4EquipHolderEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 Equipment Holder table. Each
entry of this table represents a component within the ATM NE
that accepts a replaceable plug-in unit."INDEX{ entPhysicalIndex }::={ atmfM4EquipHolderTable 1}
AtmfM4EquipHolderEntry ::=SEQUENCE{
atmfM4EquipHolderType INTEGER,
atmfM4EquipHolderAcceptableTypes DisplayString,
atmfM4EquipHolderSlotStatus INTEGER,
atmfM4EquipHolderSwLoad INTEGER}atmfM4EquipHolderType OBJECT-TYPESYNTAXINTEGER{rack(1),shelf(2),drawer(3),slot(4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The type of the component."::={ atmfM4EquipHolderEntry 1}atmfM4EquipHolderAcceptableTypes OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The types of plug-in units that can be supported by the
slot, separated by newline characters.
This attribute shall be present only when the Equipment
Holder represents a slot."::={ atmfM4EquipHolderEntry 2}atmfM4EquipHolderSlotStatus OBJECT-TYPESYNTAXINTEGER{empty(1),full(2)}MAX-ACCESSread-only
STATUScurrentDESCRIPTION"This attributes identifies whether or not a plug-in unit is
present in the slot.
This attribute shall be present only when the Equipment
Holder represents a slot."::={ atmfM4EquipHolderEntry 3}atmfM4EquipHolderSwLoad OBJECT-TYPESYNTAXINTEGER(1..2147483647)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An index into the installed software table, specifying
the software that is to be loaded into the plug-in unit
whenever an automatic reload of software is needed.
This attribute shall be present only when the Equipment
Holder represents a slot."::={ atmfM4EquipHolderEntry 4}-- ATM Forum M4 Plug-In Unit TableatmfM4PlugInUnitTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4PlugInUnitEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Plug-In Unit table. This table augments
the entPhysicalTable."::={ atmfM4MIBObjects 30}atmfM4PlugInUnitEntry OBJECT-TYPESYNTAX AtmfM4PlugInUnitEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 Plug-In Unit table. Each
entry of this table represents a piece of equipment within
the ATM NE that is inserted into and removed from an
Equipment Holder."INDEX{ entPhysicalIndex }::={ atmfM4PlugInUnitTable 1}
AtmfM4PlugInUnitEntry ::=SEQUENCE{
atmfM4PlugInUnitAdminStatus INTEGER,
atmfM4PlugInUnitAvailStatus INTEGER,
atmfM4PlugInUnitOperStatus INTEGER,
atmfM4PlugInUnitVendor DisplayString,
atmfM4PlugInUnitVersion AutonomousType,
atmfM4PlugInUnitAlarmSeverityIndex Integer32}atmfM4PlugInUnitAdminStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2)}
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Used by the administrator to lock and unlock the object."::={ atmfM4PlugInUnitEntry 1}atmfM4PlugInUnitAvailStatus OBJECT-TYPESYNTAXINTEGER{available(1),inTest(2),failed(3),powerOff(4),notInstalled(5),offLine(6),dependency(7)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Provides further information regarding the state of the
component."::={ atmfM4PlugInUnitEntry 2}atmfM4PlugInUnitOperStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2),unknown(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attributes identifies whether or not the component is
capable of performing its normal functions."::={ atmfM4PlugInUnitEntry 3}atmfM4PlugInUnitVendor OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor of the component."::={ atmfM4PlugInUnitEntry 4}atmfM4PlugInUnitVersion OBJECT-TYPESYNTAXAutonomousTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The version of the component."::={ atmfM4PlugInUnitEntry 5}atmfM4PlugInUnitAlarmSeverityIndex OBJECT-TYPE
SYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
component. The default value of this object is zero."::={ atmfM4PlugInUnitEntry 6}-- ATM Forum M4 Hardware Unit/Running Software Relationship TableatmfM4HwRunningSwTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4HwRunningSwEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Hardware Unit/Running Software
relationship table. This table describes the software that
is running on each hardware unit in the ATM NE."::={ atmfM4MIBObjects 32}atmfM4HwRunningSwEntry OBJECT-TYPESYNTAX AtmfM4HwRunningSwEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 Hardware Unit/Running Software
relationship table. Each entry of this table identifies an
entry in the entPhysicalTable and one in the hrSWRunTable."INDEX{ atmfM4HwRunningSwHwIndex,
atmfM4HwRunningSwIndex }::={ atmfM4HwRunningSwTable 1}
AtmfM4HwRunningSwEntry ::=SEQUENCE{
atmfM4HwRunningSwHwIndex INTEGER,
atmfM4HwRunningSwIndex INTEGER,
atmfM4HwRunningSwSwIndex INTEGER}atmfM4HwRunningSwHwIndex OBJECT-TYPESYNTAXINTEGER(1..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The index, in the entPhysicalTable, of the containing
hardware unit in this pair."::={ atmfM4HwRunningSwEntry 1}atmfM4HwRunningSwIndex OBJECT-TYPESYNTAXINTEGER(1..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A unique number within the context of the containing
hardware unit."
::={ atmfM4HwRunningSwEntry 2}atmfM4HwRunningSwSwIndex OBJECT-TYPESYNTAXINTEGER(1..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The index, in the hrSWRunTable, of the software product
represented by this entry."::={ atmfM4HwRunningSwEntry 3}-- ATM Forum M4 Hardware Unit/Installed Software Relationship TableatmfM4HwInstalledSwTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4HwInstalledSwEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Hardware Unit/Installed Software
relationship table. This table describes the software that
is installed on each hardware unit in the ATM NE."::={ atmfM4MIBObjects 33}atmfM4HwInstalledSwEntry OBJECT-TYPESYNTAX AtmfM4HwInstalledSwEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the ATM Forum M4 Hardware Unit/Installed
Software relationship table. Each entry of this table
identifies an entry in the entPhysicalTable and one in
the hrSWInstalledTable."INDEX{ atmfM4HwInstalledSwHwIndex,
atmfM4HwInstalledSwIndex }::={ atmfM4HwInstalledSwTable 1}
AtmfM4HwInstalledSwEntry ::=SEQUENCE{
atmfM4HwInstalledSwHwIndex INTEGER,
atmfM4HwInstalledSwIndex INTEGER,
atmfM4HwInstalledSwSwIndex INTEGER,
atmfM4HwSwAlarmSeverityIndex Integer32}atmfM4HwInstalledSwHwIndex OBJECT-TYPESYNTAXINTEGER(1..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The index, in the entPhysicalTable, of the containing
physical entity in this pair."::={ atmfM4HwInstalledSwEntry 1}atmfM4HwInstalledSwIndex OBJECT-TYPESYNTAXINTEGER(1..2147483647)
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A unique number within the context of the containing
hardware unit."::={ atmfM4HwInstalledSwEntry 2}atmfM4HwInstalledSwSwIndex OBJECT-TYPESYNTAXINTEGER(1..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The index, in the hrSWInstalledTable, of the software
product represented by this entry."::={ atmfM4HwInstalledSwEntry 3}atmfM4HwSwAlarmSeverityIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
piece of software installed on the hardware unit. The
default value of this object is zero."::={ atmfM4HwInstalledSwEntry 4}-- ATM Forum M4 Alarm Severity Identifier Textual ConventionAtmfM4AlarmLogSeverity::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The value of this object identifies the severity of
an alarm in the log, including 'cleared'."SYNTAXINTEGER{cleared(-1),indeterminate(0),critical(1),major(2),minor(3),warning(4)}AtmfM4AlarmSeverity::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The value of this object identifies the severity of
an alarm that has occurred. (Note that there is no
value corresponding to 'cleared'.)"SYNTAXINTEGER{indeterminate(0),critical(1),
major(2),minor(3),warning(4)}-- ATM Forum M4 Alarm Severity Profile TableatmfM4AlarmSevDefault OBJECT-TYPESYNTAXAtmfM4AlarmSeverityMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The default severity value used for new profile
index/trap ID pairs that have not yet been modified.
This value is also used whenever an object's alarm
severity profile index is set to 0. The default value
of this object is minor(3)."::={ atmfM4MIBObjects 34}atmfM4AlarmSevProfileIndexNext OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains an appropriate value to be used for
atmfM4AlarmSevProfileIndex when creating entries in the
atmfM4AlarmSevProfileTable.
The value -1 indicates that no unassigned entries are
available.
To obtain the index value for a new entry, the manager
issues a management protocol retrieval operation to obtain
the current value of this object. After each retrieval, the
agent should modify the value to the next unassigned index
(or -1)."::={ atmfM4MIBObjects 35}atmfM4AlarmSevProfileTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4AlarmSevProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 alarm severity profile table.
This table specifies which profiles exist. Creating
or deleting an entry in this table automatically
creates or deletes the corresponding entries in the
atmfM4AlarmSeverityTable."::={ atmfM4MIBObjects 36}atmfM4AlarmSevProfileEntry OBJECT-TYPESYNTAX AtmfM4AlarmSevProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A group of severities, one for each alarm type in
the communications alarm group."INDEX{ atmfM4AlarmSevProfileIndex }::={ atmfM4AlarmSevProfileTable 1}
AtmfM4AlarmSevProfileEntry ::=SEQUENCE{
atmfM4AlarmSevProfileIndex Integer32,
atmfM4AlarmSevProfileRowStatus RowStatus}atmfM4AlarmSevProfileIndex OBJECT-TYPESYNTAXInteger32(1..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A number identifying this alarm severity profile."::={ atmfM4AlarmSevProfileEntry 1}atmfM4AlarmSevProfileRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to create a new row or to delete
an existing row in the table."::={ atmfM4AlarmSevProfileEntry 2}-- ATM Forum M4 Alarm Severity TableatmfM4AlarmSevTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4AlarmSevEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 alarm severity table.
This table associates profile index and trap
ID pairs with severities to be used for
M4 alarm traps that have occurred.
(Note that this table does not apply to cleared alarms.)"::={ atmfM4MIBObjects 37}atmfM4AlarmSevEntry OBJECT-TYPESYNTAX AtmfM4AlarmSevEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in this table associates an alarm severity
profile index/trap ID pair with a severity.
Deleting a particular profile's row in the alarm severity
profile table deletes all rows in this table with the
same profile index.
Conceptually, rows corresponding to all possible trap ID's
are created in this table when a new alarm severity profile
is created, but the agent will return a default value
except for those few traps for which values have been set."INDEX{ atmfM4AlarmSevProfileIndex,
atmfM4AlarmSevTrapId }::={ atmfM4AlarmSevTable 1}
AtmfM4AlarmSevEntry ::=SEQUENCE{
atmfM4AlarmSevTrapId OBJECTIDENTIFIER,
atmfM4AlarmSeverity AtmfM4AlarmSeverity}atmfM4AlarmSevTrapId OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The ID of the trap type to which this entry applies."::={ atmfM4AlarmSevEntry 1}atmfM4AlarmSeverity OBJECT-TYPESYNTAXAtmfM4AlarmSeverityMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The severity to be used for this trap type when the TrapId
is selected.
If no value for this object has ever been set since
the corresponding profile was created, the agent should
return the value of the object atmfM4AlarmSevDefault."::={ atmfM4AlarmSevEntry 2}-- ATM Forum M4 Alarm Forwarding Discriminator TableatmfM4ForwardAllTraps OBJECT-IDENTITYSTATUScurrentDESCRIPTION"This is used as the value of the object
atmfM4ForwardedTrapObject when traps from all objects
are to be forwarded, or when there is only one
object of the type that forwards the specified
trap type."::={ atmfM4MIBObjects 38}atmfM4TrapForwardingTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4TrapForwardingEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Trap forwarding discriminator
table.
This table specifies which traps will be sent to
which management system."::={ atmfM4MIBObjects 39}atmfM4TrapForwardingEntry OBJECT-TYPESYNTAX AtmfM4TrapForwardingEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Information about a group of traps to be sent to
a particular IP address.
A new entry must have values for all attributes that
do not have default values before its RowStatus column
can be set to active(1)."INDEX{ atmfM4TrapForwardingIndex }::={ atmfM4TrapForwardingTable 1}
AtmfM4TrapForwardingEntry ::=SEQUENCE{
atmfM4TrapForwardingIndex Integer32,
atmfM4TrapForwardingDest IpAddress,
atmfM4ForwardedTrapId OBJECTIDENTIFIER,
atmfM4ForwardedTrapObject RowPointer,
atmfM4TrapForwardingPort Integer32,
atmfM4LowestForwardedSeverity AtmfM4AlarmSeverity,
atmfM4ForwardedIndeterminate TruthValue,
atmfM4TrapForwardingRowStatus RowStatus}atmfM4TrapForwardingIndex OBJECT-TYPESYNTAXInteger32(1..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A unique number identifying the table entry."::={ atmfM4TrapForwardingEntry 1}atmfM4TrapForwardingDest OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The IP address to which traps identified by this
table entry should be sent."::={ atmfM4TrapForwardingEntry 2}atmfM4ForwardedTrapId OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The ID of the trap type to which this entry applies."::={ atmfM4TrapForwardingEntry 3}atmfM4ForwardedTrapObject OBJECT-TYPESYNTAXRowPointerMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The object to which this entry applies.
By convention, this is the name of the first object in
the row in the table referenced.
The special value { 0 0 } indicates that
traps of this type from all objects of the type that can
generate it. It should also be used when traps from the
ATM NE are to be specified."::={ atmfM4TrapForwardingEntry 4}atmfM4TrapForwardingPort OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The UDP port on the specified management system to
which traps identified by this entry should be sent."DEFVAL{162}::={ atmfM4TrapForwardingEntry 5}atmfM4LowestForwardedSeverity OBJECT-TYPESYNTAXAtmfM4AlarmSeverityMAX-ACCESSread-createSTATUScurrent
DESCRIPTION"The lowest severity of traps of this type from
the specified object that should be sent to this
address.
This object has significance only if the trap type
specified has a severity associated with it."DEFVAL{ minor }::={ atmfM4TrapForwardingEntry 6}atmfM4ForwardedIndeterminate OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-createSTATUScurrentDESCRIPTION"When this object has the value TRUE, traps with
indeterminate severity will be forwarded to the
specified event.
This object has significance only if the trap type
specified has a severity associated with it."DEFVAL{ false }::={ atmfM4TrapForwardingEntry 7}atmfM4TrapForwardingRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to create a new row or to delete
an existing row in the table."::={ atmfM4TrapForwardingEntry 8}-- ATM Forum M4 Trap Agent MIB Log TableatmfM4TrapLogTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4TrapLogEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Trap Agent log table.
This table defines the trap logs currently maintained
by the agent.
The management system creates entries in this table to
specify which types of traps, from which ATM network
elements, should be logged.
Deleting an entry in this table deletes all entries in
the corresponding log."::={ atmfM4MIBObjects 40}atmfM4TrapLogEntry OBJECT-TYPESYNTAX AtmfM4TrapLogEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Information about a single trap log."INDEX{ atmfM4TrapLogSrc,
atmfM4TrapLogType }::={ atmfM4TrapLogTable 1}
AtmfM4TrapLogEntry ::=SEQUENCE{
atmfM4TrapLogSrc IpAddress,
atmfM4TrapLogType INTEGER,
atmfM4TrapLogAdminStatus INTEGER,
atmfM4TrapLogOperStatus INTEGER,
atmfM4TrapLogFullAction INTEGER,
atmfM4TrapLogRowStatus RowStatus}atmfM4TrapLogSrc OBJECT-TYPESYNTAXIpAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The IP address of the SNMP agent whose traps are
stored in this log."::={ atmfM4TrapLogEntry 1}atmfM4TrapLogType OBJECT-TYPESYNTAXINTEGER{objectCreated(1),objectDeleted(2),configChange(3),stateChange(4),alarm(5)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The type of traps stored in this log."::={ atmfM4TrapLogEntry 2}atmfM4TrapLogAdminStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The management system uses this object to stop and
start the operations of this object."DEFVAL{ up }::={ atmfM4TrapLogEntry 3}atmfM4TrapLogOperStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2),logFull(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates whether or not the log is capable of
performing its normal operations."::={ atmfM4TrapLogEntry 4}
atmfM4TrapLogFullAction OBJECT-TYPESYNTAXINTEGER{halt(1),wrap(2)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Indicates the action that should be performed when no
more log entries can be created due to a log-full
condition. If the value of this object is wrap(2),
each new log entry will cause the deletion of the oldest
entry still in the log, for as long as the log is still
full."DEFVAL{ wrap }::={ atmfM4TrapLogEntry 5}atmfM4TrapLogRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to create a new row or to delete
an existing row in the table."::={ atmfM4TrapLogEntry 6}-- ATM Forum M4 Trap Agent MIB Logged Trap TableatmfM4LoggedTrapTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4LoggedTrapEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ATM Forum M4 Trap Agent logged trap table.
This table is used to maintain the traps logged."::={ atmfM4MIBObjects 41}atmfM4LoggedTrapEntry OBJECT-TYPESYNTAX AtmfM4LoggedTrapEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Information about a single trap in the log.
Entries in this table are created automatically but
can be deleted by the management system.
Entries that represent 'alarm' log types are augmented
by the atmfM4LoggedAlarmEntry table."INDEX{ atmfM4TrapLogSrc,
atmfM4TrapLogType,
atmfM4LoggedTrapIndex }::={ atmfM4LoggedTrapTable 1}
AtmfM4LoggedTrapEntry ::=SEQUENCE{
atmfM4LoggedTrapIndex Unsigned32,
atmfM4LoggedTrapTime DateAndTime,
atmfM4LoggedTrapID Integer32,
atmfM4LoggedTrapObject RowPointer,
atmfM4LoggedTrapRowStatus RowStatus}atmfM4LoggedTrapIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A unique number identifying this entry in the log.
When the maximum value for this object has been reached,
it will wrap around to 0."::={ atmfM4LoggedTrapEntry 1}atmfM4LoggedTrapTime OBJECT-TYPESYNTAXDateAndTimeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time at which this trap was logged."::={ atmfM4LoggedTrapEntry 2}atmfM4LoggedTrapID OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The type of trap to which this entry applies.
Together with the logged trap ID object, this object
specifies the entity to which this logged trap referred."::={ atmfM4LoggedTrapEntry 3}atmfM4LoggedTrapObject OBJECT-TYPESYNTAXRowPointerMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The object to which this entry applies.
By convention, this is the name of the first object in
the row in the table referenced.
Together with the logged trap ID object, this object
specifies the entity to which this logged trap referred.
The special value { 0 0 } indicates that the trap refers
to the ATM NE entity itself."::={ atmfM4LoggedTrapEntry 4}atmfM4LoggedTrapRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is used to delete an existing row in the
table. Note that the only value to which a management
system can set this object is destroy(6)."::={ atmfM4LoggedTrapEntry 5}-- ATM Forum M4 Trap Agent MIB Logged Alarm TableatmfM4LoggedAlarmTable OBJECT-TYPESYNTAXSEQUENCEOF AtmfM4LoggedAlarmEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"The ATM Forum M4 Trap Agent logged alarm trap table.
This table is used to maintain extra information for
logged traps that represent alarm types."::={ atmfM4MIBObjects 42}atmfM4LoggedAlarmEntry OBJECT-TYPESYNTAX AtmfM4LoggedAlarmEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Information about the alarm-specific attributes of
a single trap in the log."INDEX{ atmfM4TrapLogSrc,
atmfM4TrapLogType,
atmfM4LoggedTrapIndex }::={ atmfM4LoggedAlarmTable 1}
AtmfM4LoggedAlarmEntry ::=SEQUENCE{
atmfM4LoggedAlarmSeverity AtmfM4AlarmLogSeverity,
atmfM4LoggedAlarmBackedUp TruthValue,
atmfM4LoggedAlarmBUObject RowPointer,
atmfM4LoggedAlarmSpecificProb DisplayString,
atmfM4LoggedAlarmRepairAct DisplayString}atmfM4LoggedAlarmSeverity OBJECT-TYPESYNTAXAtmfM4AlarmLogSeverityMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The perceived severity of the alarm, as specified by
the agent that generated it."::={ atmfM4LoggedAlarmEntry 1}atmfM4LoggedAlarmBackedUp OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If the value of this object is true, the agent reported
in this trap that the failed object had been backed up.
This object is only present if it was included in the
alarm trap corresponding to this log entry."::={ atmfM4LoggedAlarmEntry 2}atmfM4LoggedAlarmBUObject OBJECT-TYPESYNTAXRowPointerMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the object that provided back-up services to
the failed object.
This object is only present if it was included in the
alarm trap corresponding to this log entry."::={ atmfM4LoggedAlarmEntry 3}atmfM4LoggedAlarmSpecificProb OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-only
STATUScurrentDESCRIPTION"Indicates further refinements to the problem identified
by the alarm type. If more than one specific problem
is described in this object, the problem descriptions are
separated by newline characters.
This object is only present if it was included in the
alarm trap corresponding to this log entry."::={ atmfM4LoggedAlarmEntry 4}atmfM4LoggedAlarmRepairAct OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates proposed repair actions reported by the agent
for the problem identified by the alarm. If more than
one action is described in this object, the problem
descriptions are separated by newline characters.
This object is only present if it was included in the
alarm trap corresponding to this log entry."::={ atmfM4LoggedAlarmEntry 5}-- ATM M4 MIB Notification types-- Auxiliary definitions for alarms-- Except for perceived severity, the following objects may be
-- optionally appended to any alarm notification.atmfM4TrapAlarmSeverity OBJECT-TYPESYNTAXAtmfM4AlarmLogSeverityMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The perceived severity of the alarm, as specified by
the agent that generated it."::={ atmfM4MIBObjects 43}atmfM4TrapAlarmBackedUp OBJECT-TYPESYNTAXTruthValueMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"If the value of this object is true, the failed object
has been backed up."::={ atmfM4MIBObjects 44}atmfM4TrapAlarmBUObject OBJECT-TYPESYNTAXRowPointerMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Indicates the object that provided back-up services to
the failed object."::={ atmfM4MIBObjects 45}atmfM4TrapAlarmSpecificProb OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Indicates further refinements to the problem identified
by the alarm type. If more than one specific problem
is described in this object, the problem descriptions are
separated by newline characters."::={ atmfM4MIBObjects 46}atmfM4TrapAlarmRepairAct OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Indicates proposed repair actions reported by the agent
for the problem identified by the alarm. If more than
one action is described in this object, the problem
descriptions are separated by newline characters."::={ atmfM4MIBObjects 47}-- ATM M4 MIB Notifications-- Note that index values for interfaces, hardware units, VPL TPs,
-- VCL TPs, etc. can be derived from the instance values of the
-- objects included in the notifications. As examples, the ifIndex
-- value for an interface can be derived from the ifOperStatus
-- instance value, whereas the entPhysicalIndex value can be derived
-- from any of the entPhysicalContainedIn, entPhysicalParentRelPos,
-- and entPhysicalClass instance values.-- Communications Alarms (interface)atmfM4IfAisAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that an AIS alarm condition has occurred
on the physical path TP associated with the specified
interface."::={ atmfM4MIBTrapPrefix 1}atmfM4IfLcdAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that an LCD (Loss of Cell Delineation)
condition has occurred on the TC Adapter associated
with the specified interface."::={ atmfM4MIBTrapPrefix 2}atmfM4IfLofAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that an LOF (Loss of Frame)
condition has occurred on the physical path TP associated
with the specified interface."::={ atmfM4MIBTrapPrefix 3}atmfM4IfLopAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that an LOP (Loss of Pointer)
condition has occurred on the physical path TP associated
with the specified interface."::={ atmfM4MIBTrapPrefix 4}atmfM4IfLosAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that an LOS (Loss of Signal)
condition has occurred on the physical path TP associated
with the specified interface."::={ atmfM4MIBTrapPrefix 5}atmfM4IfPayloadMismatchAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that a payload type mismatch condition has
occurred on the physical path TP associated with the specified
interface."::={ atmfM4MIBTrapPrefix 6}atmfM4IfXmissionErrAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that an transmission error condition has occurred
on the physical path TP associated with the specified
interface."::={ atmfM4MIBTrapPrefix 7}atmfM4IfPathTraceMismatchAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that path trace mismatch condition has occurred
on the physical path TP associated with the specified
interface."::={ atmfM4MIBTrapPrefix 8}atmfM4IfRdiAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the physical path TP associated
with the specified interface."::={ atmfM4MIBTrapPrefix 9}atmfM4IfSignalLabelMismatchAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4TrapAlarmSeverity }STATUScurrentDESCRIPTION"Indicates that a signal label mismatch has occurred
on the physical path TP associated with the specified
interface."::={ atmfM4MIBTrapPrefix 10}
-- Communications alarms (VPL termination point)atmfM4VplTpAisAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus,
atmVplOperStatus,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an AIS alarm condition has occurred
on the VPL TP associated with the specified
interface and VPI."::={ atmfM4MIBTrapPrefix 11}atmfM4VplTpRdiAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus,
atmVplOperStatus,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VPL TP associated
with the specified interface and VPI."::={ atmfM4MIBTrapPrefix 12}-- Communications alarms (VPC termination point)atmfM4VpcTpAisAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus,
atmVplOperStatus,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an AIS alarm condition has occurred
on the VPC TP associated with the specified
interface and VPI."::={ atmfM4MIBTrapPrefix 13}atmfM4VpcTpRdiAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus,
atmVplOperStatus,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VPC TP associated
with the specified interface and VPI."::={ atmfM4MIBTrapPrefix 14}-- Communications alarms (VCL termination point)atmfM4VclTpAisAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus,
atmVclOperStatus,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an AIS alarm condition has occurred
on the VCL TP associated with the specified
interface, VPI, and VCI."::={ atmfM4MIBTrapPrefix 15}atmfM4VclTpRdiAlarm NOTIFICATION-TYPE
OBJECTS{ ifOperStatus,
atmVclOperStatus,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VCL TP associated
with the specified interface, VPI, and VCI."::={ atmfM4MIBTrapPrefix 16}-- Communications alarms (VCC termination point)atmfM4VccTpAisAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus,
atmVclOperStatus,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an AIS alarm condition has occurred
on the VCC TP associated with the specified
interface, VPI, and VCI."::={ atmfM4MIBTrapPrefix 17}atmfM4VccTpRdiAlarm NOTIFICATION-TYPEOBJECTS{ ifOperStatus,
atmVclOperStatus,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VCC TP associated
with the specified interface, VPI, and VCI."::={ atmfM4MIBTrapPrefix 18}-- ATM NE and Hardware Unit AlarmsatmfM4HwBackPlaneAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a back-plane failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 19}atmfM4HwCallEstErrAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a call establishment error condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 20}atmfM4HwCongestionAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a congestion condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 21}atmfM4HwExtIfDevProbAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an external interface device problem
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 22}atmfM4HwLineCardAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a line-card problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 23}atmfM4HwMultiplexerAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a multiplexer problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 24}atmfM4HwPowerAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a power problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 25}atmfM4HwProcessorAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a processor problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 26}atmfM4HwProtectionPathAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a protection path problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 27}
atmfM4HwReceiverFailAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a receiver failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 28}atmfM4HwPIUnitMissingAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a plug-in unit missing condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 29}atmfM4HwPIUnitProbAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a plug-in unit problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 30}atmfM4HwPIUnitMismatchAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a plug-in unit type mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 31}atmfM4HwTimingProbAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a timing problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 32}atmfM4HwXmitterFailAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a transmitter failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 33}atmfM4HwTrunkCardAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a trunk-card problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 34}atmfM4HwStorageCapacityAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrent
DESCRIPTION"Indicates that a storage capacity problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 35}atmfM4HwMemoryMismatchAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a memory mismatch alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 36}atmfM4HwCorruptDataAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a corrupt data alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 37}atmfM4HwSwEnvironAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a software environment problem
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 38}atmfM4HwSwDownloadFailAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a software download failure
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 39}atmfM4HwVersionMismatchAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a version mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 40}atmfM4HwFanFailAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a cooling fan failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 41}atmfM4HwDoorOpenAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that an enclosure door open condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 42}atmfM4HwFuseFailAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a fuse failure alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 43}atmfM4HwHighTempAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a high temperature condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 44}-- Software alarmsatmfM4SwVersionMismatchAlarm NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4HwInstalledSwSwIndex,
atmfM4TrapAlarmSeverity
}STATUScurrentDESCRIPTION"Indicates that a version mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."::={ atmfM4MIBTrapPrefix 45}-- State change notification trapsatmfM4VplTpUp NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVplOperStatus }STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
VPL termination point has transitioned to 'up'."::={ atmfM4MIBTrapPrefix 46}atmfM4VplTpDown NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVplOperStatus }STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
VPL termination point has transitioned to 'down'."::={ atmfM4MIBTrapPrefix 47}atmfM4VclTpUp NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVclOperStatus }STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
VCL termination point has transitioned to 'up'."::={ atmfM4MIBTrapPrefix 48}atmfM4VclTpDown NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVclOperStatus }STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
VCL termination point has transitioned to 'down'."::={ atmfM4MIBTrapPrefix 49}atmfM4VplXConnUp NOTIFICATION-TYPEOBJECTS{ atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
VPL cross-connection has transitioned to 'up'."::={ atmfM4MIBTrapPrefix 50}atmfM4VplXConnDown NOTIFICATION-TYPEOBJECTS{ atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
VPL cross-connection has transitioned to 'down'."::={ atmfM4MIBTrapPrefix 51}atmfM4VclXConnUp NOTIFICATION-TYPEOBJECTS{ atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
VCL cross-connection has transitioned to 'up'."::={ atmfM4MIBTrapPrefix 52}
atmfM4VclXConnDown NOTIFICATION-TYPEOBJECTS{ atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
VCL cross-connection has transitioned to 'down'."::={ atmfM4MIBTrapPrefix 53}atmfM4HwUnitUp NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
hardware unit has transitioned to 'up'."::={ atmfM4MIBTrapPrefix 54}atmfM4HwUnitDown NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}STATUScurrentDESCRIPTION"Indicates that the operational state of the specified
hardware unit has transitioned to 'down'."::={ atmfM4MIBTrapPrefix 55}-- Object creation and deletion notification trapsatmfM4AtmCellIfCreated NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmfM4IfType }STATUScurrentDESCRIPTION"Indicates that an ATM cell layer interface has just
been created on the interface."::={ atmfM4MIBTrapPrefix 56}atmfM4AtmCellIfDeleted NOTIFICATION-TYPEOBJECTS{ ifOperStatus }STATUScurrentDESCRIPTION"Indicates that the ATM cell layer interface has just
been deleted."::={ atmfM4MIBTrapPrefix 57}atmfM4VpcTpCreated NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVplOperStatus }STATUScurrentDESCRIPTION"Indicates that the VPC termination point has just
been created."::={ atmfM4MIBTrapPrefix 58}atmfM4VpcTpDeleted NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVplOperStatus }
STATUScurrentDESCRIPTION"Indicates that the VPC termination point has just
been deleted."::={ atmfM4MIBTrapPrefix 59}atmfM4VccTpCreated NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVclOperStatus }STATUScurrentDESCRIPTION"Indicates that the VCC termination point has just
been created."::={ atmfM4MIBTrapPrefix 60}atmfM4VccTpDeleted NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVclOperStatus }STATUScurrentDESCRIPTION"Indicates that the VCC termination point has just
been deleted."::={ atmfM4MIBTrapPrefix 61}atmfM4VplXConnCreated NOTIFICATION-TYPEOBJECTS{ atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the VPL cross-connection has just
been created. When a cross-connection is created along
with its VPL endpoints, this trap should be emitted
to indicate the creation of the entire group of objects."::={ atmfM4MIBTrapPrefix 62}atmfM4VplXConnDeleted NOTIFICATION-TYPEOBJECTS{ atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the VPL cross-connection has just
been deleted. When a cross-connection is deleted along
with its VPL endpoints, this trap should be emitted
to indicate the deletion of the entire group of objects."::={ atmfM4MIBTrapPrefix 63}atmfM4VclXConnCreated NOTIFICATION-TYPEOBJECTS{ atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the VCL cross-connection has just
been created. When a cross-connection is created along
with its VCL endpoints, this trap should be emitted
to indicate the creation of the entire group of objects."::={ atmfM4MIBTrapPrefix 64}atmfM4VclXConnDeleted NOTIFICATION-TYPE
OBJECTS{ atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the VCL cross-connection has just
been deleted. When a cross-connection is deleted along
with its VCL endpoints, this trap should be emitted
to indicate the deletion of the entire group of objects."::={ atmfM4MIBTrapPrefix 65}atmfM4HwUnitCreated NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}STATUScurrentDESCRIPTION"Indicates that the specified hardware unit has been
installed at the specified location."::={ atmfM4MIBTrapPrefix 66}atmfM4HwUnitDeleted NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}STATUScurrentDESCRIPTION"Indicates that the specified hardware unit has been
removed or de-installed from the specified location."::={ atmfM4MIBTrapPrefix 67}atmfM4InstalledSwCreated NOTIFICATION-TYPEOBJECTS{ atmfM4HwInstalledSwSwIndex,
hrSWInstalledIndex,
hrSWInstalledName
}STATUScurrentDESCRIPTION"Indicates that the specified software package has been
installed."::={ atmfM4MIBTrapPrefix 68}atmfM4InstalledSwDeleted NOTIFICATION-TYPEOBJECTS{ atmfM4HwInstalledSwSwIndex,
hrSWInstalledIndex,
hrSWInstalledName
}STATUScurrentDESCRIPTION"Indicates that the specified software package has been
removed."::={ atmfM4MIBTrapPrefix 69}-- Configuration change notification trapsatmfM4IfChanged NOTIFICATION-TYPEOBJECTS{ ifOperStatus }STATUScurrentDESCRIPTION"Indicates that the configuration of the interface has
been changed."::={ atmfM4MIBTrapPrefix 70}
atmfM4VplTpChanged NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVplOperStatus }STATUScurrentDESCRIPTION"Indicates that the VPL termination point configuration
has been changed."::={ atmfM4MIBTrapPrefix 71}atmfM4VclTpChanged NOTIFICATION-TYPEOBJECTS{ ifOperStatus, atmVclOperStatus }STATUScurrentDESCRIPTION"Indicates that the VCL termination point configuration
has been changed."::={ atmfM4MIBTrapPrefix 72}atmfM4VplXConnChanged NOTIFICATION-TYPEOBJECTS{ atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the VPL cross-connection configuration
has been changed."::={ atmfM4MIBTrapPrefix 73}atmfM4VclXConnChanged NOTIFICATION-TYPEOBJECTS{ atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}STATUScurrentDESCRIPTION"Indicates that the VCL cross-connection configuration
has been changed."::={ atmfM4MIBTrapPrefix 74}atmfM4HwUnitChanged NOTIFICATION-TYPEOBJECTS{ entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}STATUScurrentDESCRIPTION"Indicates that the specified hardware unit configuration
has changed."::={ atmfM4MIBTrapPrefix 75}atmfM4InstalledSwChanged NOTIFICATION-TYPEOBJECTS{ hrSWInstalledIndex }STATUScurrentDESCRIPTION"Indicates that the specified software package configuration
has changed."::={ atmfM4MIBTrapPrefix 76}-- Conformance statementsatmfM4Groups OBJECTIDENTIFIER::={ atmfM4MIBConformance 1}
atmfM4Compliances OBJECTIDENTIFIER::={ atmfM4MIBConformance 2}-- compliance statementsatmfM4Compliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statements are listed as a set up conformance
units that correspond to each table. Support for all tables
is mandatory."MODULE-- this moduleMANDATORY-GROUPS{
atmfM4General,
atmfM4PhysPathTpGroup,
atmfM4TcAdapterGroup,
atmfM4AtmLayerGroup,
atmfM4VplGroup,
atmfM4VclGroup,
atmfM4VpXConnGroup,
atmfM4VcXConnGroup,
atmfM4VpNextVpiGroup,
atmfM4VcNextVciGroup,
atmfM4CellProtoCurrGroup,
atmfM4CellProtoHistGroup,
atmfM4CellProtoErrorGroup,
atmfM4TcProtoCurrGroup,
atmfM4TcProtoHistGroup,
atmfM4VpUpcNpcCurrGroup,
atmfM4VpUpcNpcHistGroup,
atmfM4VcUpcNpcCurrGroup,
atmfM4VcUpcNpcHistGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup,
atmfM4EquipGroup,
atmfM4EquipHolderGroup,
atmfM4PlugInUnitGroup,
atmfM4HwRunningSwGroup,
atmfM4HwInstalledSwGroup,
atmfM4AlarmSevGroup,
atmfM4TrapForwardingGroup,
atmfM4TrapLogGroup,
atmfM4LoggedTrapGroup,
atmfM4LoggedAlarmGroup,
atmfM4NotificationsGroup
}OBJECT atmfM4TcACellScrambling
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for a TC Adapter
which allows deactivation of cell scrambling."OBJECT atmfM4IfLoopbackLocationCode
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is only required for an ATM cell
layer interface whose atmfM4IfType is not none(0)."OBJECT atmfM4IfSubscriberAddress
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for an ATM cell
layer interface whose atmfM4IfType is uni(1)."OBJECT atmfM4IfPreferredCarrier
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is only required for an ATM cell
layer interface whose atmfM4IfType is uni(1) and which
supports SVC services."OBJECT atmfM4IfFarEndCarrierNetwork
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is only required for an ATM cell
layer interface whose atmfM4IfType is bici(2) and which
supports SVC services."OBJECT atmfM4VpNextVpiValue
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object to supply unused VPI values for
use in creating entries in the atmVplTable is optional."OBJECT atmfM4VcNextVciValue
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object to supply unused VCI values for
use in creating entries in the atmVclTable is optional."OBJECT atmfM4VpUpcNpcCurrDiscardedClp0
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only if CLP=0 traffic
is separately policed."OBJECT atmfM4VpUpcNpcCurrPassedClp0
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only if CLP=0 traffic
is separately policed."OBJECT atmfM4VpUpcNpcHistDiscardedClp0
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only if CLP=0 traffic
is separately policed."OBJECT atmfM4VpUpcNpcHistPassedClp0
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only if CLP=0 traffic
is separately policed."OBJECT atmfM4VcUpcNpcCurrDiscardedClp0
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only if CLP=0 traffic
is separately policed."OBJECT atmfM4VcUpcNpcCurrPassedClp0
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only if CLP=0 traffic
is separately policed."OBJECT atmfM4VcUpcNpcHistDiscardedClp0
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only if CLP=0 traffic
is separately policed."OBJECT atmfM4VcUpcNpcHistPassedClp0
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only if CLP=0 traffic
is separately policed."OBJECT atmfM4EquipHolderAcceptableTypes
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for an Equipment
Holder that represents a slot."OBJECT atmfM4EquipHolderSlotStatus
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for an Equipment
Holder that represents a slot."OBJECT atmfM4EquipHolderSwLoad
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for an Equipment
Holder that represents a slot."OBJECT atmfM4LoggedAlarmBackedUp
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmBackup object."OBJECT atmfM4LoggedAlarmBUObject
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmBUObject object."OBJECT atmfM4LoggedAlarmSpecificProb
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmSpecificProb object."OBJECT atmfM4LoggedAlarmRepairAct
MIN-ACCESSnot-accessibleDESCRIPTION"Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmRepairAct object."::={ atmfM4Compliances 1}-- units of conformanceatmfM4General OBJECT-GROUPOBJECTS{
atmfM4NeVendor,
atmfM4NeVersion,
atmfM4NeStartTime,
atmfM4NeAlarmSeverityIndex,
atmfM4NeSuppressZeroStats
}STATUScurrentDESCRIPTION"The ATM Forum M4 ATM NE high-level objects."::={ atmfM4Groups 1}atmfM4PhysPathTpGroup OBJECT-GROUPOBJECTS{
atmfM4PhysPathTpHwUnitIndex,
atmfM4PhysPathTpPortID,
atmfM4PhysPathTpAlarmSeverityIndex
}STATUScurrentDESCRIPTION"The ATM Forum M4 interface Configuration table extensions
for the physical path termination point."::={ atmfM4Groups 2}atmfM4TcAdapterGroup OBJECT-GROUPOBJECTS{
atmfM4TcACellScrambling,
atmfM4TcAlarmSeverityIndex
}STATUScurrentDESCRIPTION"The ATM Forum M4 interface Configuration table extensions
for the TC Adapter."::={ atmfM4Groups 3}atmfM4AtmLayerGroup OBJECT-GROUPOBJECTS{
atmfM4IfType,
atmfM4IfLoopbackLocationCode,
atmfM4IfSubscriberAddress,
atmfM4IfPreferredCarrier,
atmfM4IfFarEndCarrierNetwork
}STATUScurrentDESCRIPTION"The ATM Forum M4 interface Configuration table extensions
for the ATM cell layer."::={ atmfM4Groups 4}atmfM4VplGroup OBJECT-GROUPOBJECTS{
atmfM4VplSegEndPt
}STATUScurrentDESCRIPTION"The ATM Forum M4 VPL Termination Point Configuration
table extensions. "::={ atmfM4Groups 5}atmfM4VclGroup OBJECT-GROUPOBJECTS{
atmfM4VclSegEndPt
}STATUScurrentDESCRIPTION"The ATM Forum M4 VCL Termination Point Configuration
table extensions."::={ atmfM4Groups 6}atmfM4VpXConnGroup OBJECT-GROUPOBJECTS{
atmfM4VpXConnRecover
}STATUScurrentDESCRIPTION"The ATM Forum M4 VP Cross-Connect Configuration table
extensions."::={ atmfM4Groups 7}atmfM4VcXConnGroup OBJECT-GROUPOBJECTS{
atmfM4VcXConnRecover
}STATUScurrentDESCRIPTION"The ATM Forum M4 VC Cross-Connect Configuration table
extensions."::={ atmfM4Groups 8}atmfM4VpNextVpiGroup OBJECT-GROUPOBJECTS{
atmfM4VpNextVpiValue
}STATUScurrentDESCRIPTION"The ATM Forum M4 VP Next VPI value table."::={ atmfM4Groups 9}atmfM4VcNextVciGroup OBJECT-GROUPOBJECTS{
atmfM4VcNextVciValue
}STATUScurrentDESCRIPTION"The ATM Forum M4 VC Next VCI value table."
::={ atmfM4Groups 10}atmfM4CellProtoCurrGroup OBJECT-GROUPOBJECTS{
atmfM4CellProtoCurrSuspect,
atmfM4CellProtoCurrElapsedTime,
atmfM4CellProtoCurrSupprIntvls,
atmfM4CellProtoCurrProtoErrors,
atmfM4CellProtoCurrInOAMCells
}STATUScurrentDESCRIPTION"The ATM Forum M4 Cell Protocol Monitoring Current Data
table."::={ atmfM4Groups 11}atmfM4CellProtoHistGroup OBJECT-GROUPOBJECTS{
atmfM4CellProtoHistSuspect,
atmfM4CellProtoHistElapsedTime,
atmfM4CellProtoHistSupprIntvls,
atmfM4CellProtoHistProtoErrors,
atmfM4CellProtoHistInOAMCells
}STATUScurrentDESCRIPTION"The ATM Forum M4 Cell Protocol Monitoring History Data
table."::={ atmfM4Groups 12}atmfM4CellProtoErrorGroup OBJECT-GROUPOBJECTS{
atmfM4CellProtoErrorTime,
atmfM4CellProtoErrorReason,
atmfM4CellProtoErrorVpi,
atmfM4CellProtoErrorVci
}STATUScurrentDESCRIPTION"The ATM Forum M4 Cell Protocol Monitoring Error Log table."::={ atmfM4Groups 13}atmfM4TcProtoCurrGroup OBJECT-GROUPOBJECTS{
atmfM4TcProtoCurrSuspect,
atmfM4TcProtoCurrElapsedTime,
atmfM4TcProtoCurrSupprIntvls,
atmfM4TcProtoCurrDiscardHECViol
}STATUScurrentDESCRIPTION"The ATM Forum M4 TC Adapter Protocol Monitoring Current
Data table."::={ atmfM4Groups 14}atmfM4TcProtoHistGroup OBJECT-GROUPOBJECTS{
atmfM4TcProtoHistSuspect,
atmfM4TcProtoHistElapsedTime,
atmfM4TcProtoHistSupprIntvls,
atmfM4TcProtoHistDiscardHECViol
}STATUScurrentDESCRIPTION"The ATM Forum M4 TC Adapter Protocol Monitoring History
Data table."::={ atmfM4Groups 15}
atmfM4VpUpcNpcCurrGroup OBJECT-GROUPOBJECTS{
atmfM4VpUpcNpcCurrSuspect,
atmfM4VpUpcNpcCurrElapsedTime,
atmfM4VpUpcNpcCurrSupprIntvls,
atmfM4VpUpcNpcCurrDiscardedCells,
atmfM4VpUpcNpcCurrDiscardedClp0,
atmfM4VpUpcNpcCurrPassedCells,
atmfM4VpUpcNpcCurrPassedClp0
}STATUScurrentDESCRIPTION"The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VPL termination points."::={ atmfM4Groups 16}atmfM4VpUpcNpcHistGroup OBJECT-GROUPOBJECTS{
atmfM4VpUpcNpcHistSuspect,
atmfM4VpUpcNpcHistElapsedTime,
atmfM4VpUpcNpcHistSupprIntvls,
atmfM4VpUpcNpcHistDiscardedCells,
atmfM4VpUpcNpcHistDiscardedClp0,
atmfM4VpUpcNpcHistPassedCells,
atmfM4VpUpcNpcHistPassedClp0
}STATUScurrentDESCRIPTION"The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VPL termination points."::={ atmfM4Groups 17}atmfM4VcUpcNpcCurrGroup OBJECT-GROUPOBJECTS{
atmfM4VcUpcNpcCurrSuspect,
atmfM4VcUpcNpcCurrElapsedTime,
atmfM4VcUpcNpcCurrSupprIntvls,
atmfM4VcUpcNpcCurrDiscardedCells,
atmfM4VcUpcNpcCurrDiscardedClp0,
atmfM4VcUpcNpcCurrPassedCells,
atmfM4VcUpcNpcCurrPassedClp0
}STATUScurrentDESCRIPTION"The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VCL termination points."::={ atmfM4Groups 18}atmfM4VcUpcNpcHistGroup OBJECT-GROUPOBJECTS{
atmfM4VcUpcNpcHistSuspect,
atmfM4VcUpcNpcHistElapsedTime,
atmfM4VcUpcNpcHistSupprIntvls,
atmfM4VcUpcNpcHistDiscardedCells,
atmfM4VcUpcNpcHistDiscardedClp0,
atmfM4VcUpcNpcHistPassedCells,
atmfM4VcUpcNpcHistPassedClp0
}STATUScurrentDESCRIPTION"The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VCL termination points."::={ atmfM4Groups 19}atmfM4VpTestGroup OBJECT-GROUPOBJECTS{
atmfM4VpTestId,
atmfM4VpTestStatus,
atmfM4VpTestType,
atmfM4VpTestResult,
atmfM4VpTestCode,
atmfM4VpTestOwner
}STATUScurrentDESCRIPTION"The ATM Forum M4 VP Termination Point Test table."::={ atmfM4Groups 20}atmfM4VcTestGroup OBJECT-GROUPOBJECTS{
atmfM4VcTestId,
atmfM4VcTestStatus,
atmfM4VcTestType,
atmfM4VcTestResult,
atmfM4VcTestCode,
atmfM4VcTestOwner
}STATUScurrentDESCRIPTION"The ATM Forum M4 VC Termination Point Test table."::={ atmfM4Groups 21}atmfM4EquipGroup OBJECT-GROUPOBJECTS{
atmfM4EquipAdminStatus,
atmfM4EquipLocation,
atmfM4EquipOperStatus,
atmfM4EquipVendor,
atmfM4EquipVersion,
atmfM4EquipUserLabel,
atmfM4EquipAlarmSeverityIndex
}STATUScurrentDESCRIPTION"The ATM Forum M4 Equipment table."::={ atmfM4Groups 22}atmfM4EquipHolderGroup OBJECT-GROUPOBJECTS{
atmfM4EquipHolderType,
atmfM4EquipHolderAcceptableTypes,
atmfM4EquipHolderSlotStatus,
atmfM4EquipHolderSwLoad
}STATUScurrentDESCRIPTION"The ATM Forum M4 Equipment Holder table."::={ atmfM4Groups 23}atmfM4PlugInUnitGroup OBJECT-GROUPOBJECTS{
atmfM4PlugInUnitAdminStatus,
atmfM4PlugInUnitAvailStatus,
atmfM4PlugInUnitOperStatus,
atmfM4PlugInUnitVendor,
atmfM4PlugInUnitVersion,
atmfM4PlugInUnitAlarmSeverityIndex
}STATUScurrentDESCRIPTION"The ATM Forum M4 Plug-In Unit table."::={ atmfM4Groups 24}atmfM4HwRunningSwGroup OBJECT-GROUPOBJECTS{
atmfM4HwRunningSwSwIndex
}STATUScurrent
DESCRIPTION"The ATM Forum M4 Hardware Unit/Running Software table."::={ atmfM4Groups 25}atmfM4HwInstalledSwGroup OBJECT-GROUPOBJECTS{
atmfM4HwInstalledSwSwIndex,
atmfM4HwSwAlarmSeverityIndex
}STATUScurrentDESCRIPTION"The ATM Forum M4 Hardware Unit/Installed Software table."::={ atmfM4Groups 26}atmfM4AlarmSevGroup OBJECT-GROUPOBJECTS{
atmfM4AlarmSevProfileRowStatus,
atmfM4AlarmSeverity,
atmfM4AlarmSevDefault,
atmfM4AlarmSevProfileIndexNext
}STATUScurrentDESCRIPTION"The ATM Forum M4 Alarm handling objects."::={ atmfM4Groups 27}atmfM4TrapForwardingGroup OBJECT-GROUPOBJECTS{
atmfM4TrapForwardingDest,
atmfM4ForwardedTrapId,
atmfM4ForwardedTrapObject,
atmfM4TrapForwardingPort,
atmfM4LowestForwardedSeverity,
atmfM4ForwardedIndeterminate,
atmfM4TrapForwardingRowStatus
}STATUScurrentDESCRIPTION"The ATM Forum M4 Trap forwarding table."::={ atmfM4Groups 28}atmfM4TrapLogGroup OBJECT-GROUPOBJECTS{
atmfM4TrapLogAdminStatus,
atmfM4TrapLogOperStatus,
atmfM4TrapLogFullAction,
atmfM4TrapLogRowStatus
}STATUScurrentDESCRIPTION"The ATM Forum M4 Trap Agent log table."::={ atmfM4Groups 29}atmfM4LoggedTrapGroup OBJECT-GROUPOBJECTS{
atmfM4LoggedTrapTime,
atmfM4LoggedTrapID,
atmfM4LoggedTrapObject,
atmfM4LoggedTrapRowStatus
}STATUScurrentDESCRIPTION"The ATM Forum M4 Trap Agent logged trap table."::={ atmfM4Groups 30}atmfM4LoggedAlarmGroup OBJECT-GROUPOBJECTS{
atmfM4LoggedAlarmSeverity,
atmfM4LoggedAlarmBackedUp,
atmfM4LoggedAlarmBUObject,
atmfM4LoggedAlarmSpecificProb,
atmfM4LoggedAlarmRepairAct,
atmfM4TrapAlarmSeverity,
atmfM4TrapAlarmBackedUp,
atmfM4TrapAlarmBUObject,
atmfM4TrapAlarmSpecificProb,
atmfM4TrapAlarmRepairAct
}STATUScurrentDESCRIPTION"The ATM Forum M4 Trap Agent logged alarm trap table."::={ atmfM4Groups 31}atmfM4NotificationsGroup NOTIFICATION-GROUPNOTIFICATIONS{
atmfM4IfAisAlarm,
atmfM4IfLcdAlarm,
atmfM4IfLofAlarm,
atmfM4IfLopAlarm,
atmfM4IfLosAlarm,
atmfM4IfPayloadMismatchAlarm,
atmfM4IfXmissionErrAlarm,
atmfM4IfPathTraceMismatchAlarm,
atmfM4IfRdiAlarm,
atmfM4IfSignalLabelMismatchAlarm,
atmfM4VplTpAisAlarm,
atmfM4VplTpRdiAlarm,
atmfM4VpcTpAisAlarm,
atmfM4VpcTpRdiAlarm,
atmfM4VclTpAisAlarm,
atmfM4VclTpRdiAlarm,
atmfM4VccTpAisAlarm,
atmfM4VccTpRdiAlarm,
atmfM4HwBackPlaneAlarm,
atmfM4HwCallEstErrAlarm,
atmfM4HwCongestionAlarm,
atmfM4HwExtIfDevProbAlarm,
atmfM4HwLineCardAlarm,
atmfM4HwMultiplexerAlarm,
atmfM4HwPowerAlarm,
atmfM4HwProcessorAlarm,
atmfM4HwProtectionPathAlarm,
atmfM4HwReceiverFailAlarm,
atmfM4HwPIUnitMissingAlarm,
atmfM4HwPIUnitProbAlarm,
atmfM4HwPIUnitMismatchAlarm,
atmfM4HwTimingProbAlarm,
atmfM4HwXmitterFailAlarm,
atmfM4HwTrunkCardAlarm,
atmfM4HwStorageCapacityAlarm,
atmfM4HwMemoryMismatchAlarm,
atmfM4HwCorruptDataAlarm,
atmfM4HwSwEnvironAlarm,
atmfM4HwSwDownloadFailAlarm,
atmfM4HwVersionMismatchAlarm,
atmfM4HwFanFailAlarm,
atmfM4HwDoorOpenAlarm,
atmfM4HwFuseFailAlarm,
atmfM4HwHighTempAlarm,
atmfM4SwVersionMismatchAlarm,
atmfM4VplTpUp,
atmfM4VplTpDown,
atmfM4VclTpUp,
atmfM4VclTpDown,
atmfM4VplXConnUp,
atmfM4VplXConnDown,
atmfM4VclXConnUp,
atmfM4VclXConnDown,
atmfM4HwUnitUp,
atmfM4HwUnitDown,
atmfM4AtmCellIfCreated,
atmfM4AtmCellIfDeleted,
atmfM4VpcTpCreated,
atmfM4VpcTpDeleted,
atmfM4VccTpCreated,
atmfM4VccTpDeleted,
atmfM4VplXConnCreated,
atmfM4VplXConnDeleted,
atmfM4VclXConnCreated,
atmfM4VclXConnDeleted,
atmfM4HwUnitCreated,
atmfM4HwUnitDeleted,
atmfM4InstalledSwCreated,
atmfM4InstalledSwDeleted,
atmfM4IfChanged,
atmfM4VplTpChanged,
atmfM4VclTpChanged,
atmfM4VplXConnChanged,
atmfM4VclXConnChanged,
atmfM4HwUnitChanged,
atmfM4InstalledSwChanged
}STATUScurrentDESCRIPTION"The ATM Forum M4 notification list."::={ atmfM4Groups 32}END